「Platinum 88 Grand Piano Sound Library」の版間の差分

提供:yonewiki
258行目: 258行目:


 The Platinum 88 LE is great if you want to get a quick-loading piano sound that uses few computer resources. For example, if you've successfully recorded your inspired MIDI track, you can replace it with the Platinum 88 or Platinum LE+ for better sound quality during mixdown.
 The Platinum 88 LE is great if you want to get a quick-loading piano sound that uses few computer resources. For example, if you've successfully recorded your inspired MIDI track, you can replace it with the Platinum 88 or Platinum LE+ for better sound quality during mixdown.
<big>'''Getting Started'''</big>
&nbsp;This section explains how to install and run the Platinum 88.
'''Installation'''
&nbsp;The Platinum 88 comes on two DVDs, each with its own installer:
*Platinum LE+ & Platinum LE - installs the 1GB and 200 MB banks.
*Platinum 88 - install the 7GB bank.
&nbsp;Tou can install one, two, or all three versions. Keep your original discs in case you want to reinstall the bank at a later date. Once you install, you may want to update your library in Emulator X or Proteus X.
&nbsp;To install the Platinum 88 LE+ and/ or Platinum 88 LE:
*1.Insert the DV labelled Platinum 88 LE+&LE.
*2.Follow the installer instructions. If the installer does not appear, browse the DVD, go to the Setup folder, and run setup.exe
*3.When the installer prompts you to choose a location for the platinum 88, choose a PERMANENT location. If possible, choose a location on a drive other than the one where your operating system is installed.
*4.When prompted, choose a setup type:
:*'''Full Installation''' install both the Platinum 88 LE+ and the Platinmu 88 LE in the location you selected in step 2.
:*'''Custom Installation''' allows you to specify which banks to install and where your want each one to go.
&nbsp;To install th Platinum 88 (7 gigabyte):
*1.Insert the DVD labeled Platinum 88.
*2.Follow the installer instructions. If the installer does no appear, browse the DVD, go to the Setup folder, and setup.exe.
*3.When the installer prompts you to choose a location for the Platinum 88, choose a PERMANENT location. If possible, choose a location on a drive other than the one where your operating system is installed.


 
 
<big>'''Running the Platinum 88'''</big>
&nbsp;The Platinum 88 runs in Proteus X or Emulator X Version 1.5 or later.
&nbsp;There are two ways to start the Platinum 88:
*Go to Start → Program Files → Creative Professional → E-MU Sounde Central → Platinmu 88, and select which version you want to run.
Or
*Start Emulator X or Proteus X, select File → Open, and browse to the location where you saved your banks.


[[メインページ#音楽制作|音楽制作]]へ戻る。
[[メインページ#音楽制作|音楽制作]]へ戻る。

2023年2月21日 (火) 14:52時点における版

音楽制作へ戻る。

概要

Plutinum 88


Platinum88 7GByteとPlatinum88 LE(200MByte)とPlatinum88 LE+(1GByte)があります。それぞれ1音あたりの音の強さ毎のサンプル数とサンプリング周波数が違っていて、7G は 7Layer(24bit:48kHz)、1G は 3Layer(16bit:44.1kHz)、200M は 2Layer(16bit:44.1kHz) となっています。


バンクプログラム番号リスト

Number Bank Prog Name Category
0 0 0 Grand Piano 1 Piano
1 0 1 Grand Piano 2 Piano
2 0 2 Grand Piano 3 Piano
3 0 3 Grand Piano 4 Piano
4 0 4 Grand Piano 5 Piano
5 0 5 Grand Piano 6 Piano
6 0 6 Ballad Grand 1 Piano
7 0 7 Ballad Grand 2 Piano
8 0 8 Room Grand Piano
9 0 9 Hall Grand Piano
10 0 10 Pop Grand Piano
11 0 11 Rock Grand 1 Piano
12 0 12 Rock Grand 2 Piano
13 0 13 Comp Grand 1 Piano
14 0 14 Comp Grand 2 Piano
15 0 15 Dance Grand Piano
16 0 16 Ballroom Grand Piano
17 0 17 Honky Tonk Piano
18 0 18 Stacked Piano Piano
19 0 19 Tight Grand Piano
20 0 20 Dark Grand Piano
21 0 21 Flange Grand Piano
22 0 22 Mellow Grand Piano
23 0 23 Attack Grand Piano
24 0 24 Tremolo Grand Piano
25 0 25 Distortion Grand Piano
26 0 26 E-MU Systems 2006

説明書

Platinum 88

Profesional Grand Piano


Introduction

 The E-MU® Platinum 88 Professional Grand Piano is the complete piano bank for Emulator X and Proteus X. Featureing a meticulously sampled Steinway Model L concert grand piano the Platinum 88 includes tweleve layers of samples for each of the piano's 88 notes: five Layers with the sustain pedal up, six with the sustain pedal down, and a layer entirely dedicated to note-off sounds.


About the Recording Session

 After an exhaustive search throughout the San Francisco bay area the E-MU Sound Censral team finally discovered Whip Records in Berkeley,CA--home to a beautiful, well-maintained Steinway Model L concert grand. The piano was perfect and the room sounded great, so they started recording.


 Using Neumann U67 microphones and high-quality preamps, every note was meticulously recorded at 24-bit resolution. Each note was allowed to sound until disappearing completely -- enbling the Platinum 88 bank to be completely natural sounding and free of loops.


 Each sample was reviewed, and the best were assembled into the twelve layers that make up the Platinum 88 7 gigabyte bank. As a result of this process, the samples are perfectly matched, sound great, and are free of artifacts


 The final set of samples was then carefully mapped to the proper key and velocity layers. Finally the pedals and continuous controllers were programmed to take advantage of the Emulator X and Proteus X synthesizer engines, providing you with further tweakes and enhancements that allow you to easily configure the Platinum 88 to your personal liking.


 The result is the finest, most natural sounding piano sample library available.


The Final Product

 The Platinum 88 Professional Grand Piano contains three version of varying size:

  • Platinum 88 (7 gigabyte)
 The Platinum 88 contains complete non-looping samples of all 88 notes -- five layers with the sustain pedal up, six layers with the sus tain pedal down, and one layer of note-off samples. Each stereo sample is 24 bits, 48kHz.


  • Platinum 88 LE+ (1 gigabyte)
 The Platinum LE+ has three layers of pedal-up samples, and three layers of pedal-down samples. Each stereo sample is 16 bits, 44.1kHz, looped.


  • Platinum 88 LE (200 megabyte)
 The Platinum LE has two layers of pedal-up samples. Each stereo sample is 16 bits, 44.1kHz, looped.


 Having three versions of varying layer layer depths provides you with plenty of options depending one the intended use and the available system resources.


 For example, while the Platinum 88 is a must for solo piano performances, it will take a heavy toll on available resources. If your system has difficulty running the Platinum 88 (or if your computer is multitasking), the Platinum 88 LE+ is an economic alternative.


 The Platinum 88 LE is great if you want to get a quick-loading piano sound that uses few computer resources. For example, if you've successfully recorded your inspired MIDI track, you can replace it with the Platinum 88 or Platinum LE+ for better sound quality during mixdown.


Getting Started

 This section explains how to install and run the Platinum 88.


Installation

 The Platinum 88 comes on two DVDs, each with its own installer:

  • Platinum LE+ & Platinum LE - installs the 1GB and 200 MB banks.
  • Platinum 88 - install the 7GB bank.

 Tou can install one, two, or all three versions. Keep your original discs in case you want to reinstall the bank at a later date. Once you install, you may want to update your library in Emulator X or Proteus X.


 To install the Platinum 88 LE+ and/ or Platinum 88 LE:

  • 1.Insert the DV labelled Platinum 88 LE+&LE.
  • 2.Follow the installer instructions. If the installer does not appear, browse the DVD, go to the Setup folder, and run setup.exe
  • 3.When the installer prompts you to choose a location for the platinum 88, choose a PERMANENT location. If possible, choose a location on a drive other than the one where your operating system is installed.
  • 4.When prompted, choose a setup type:
  • Full Installation install both the Platinum 88 LE+ and the Platinmu 88 LE in the location you selected in step 2.
  • Custom Installation allows you to specify which banks to install and where your want each one to go.

 To install th Platinum 88 (7 gigabyte):

  • 1.Insert the DVD labeled Platinum 88.
  • 2.Follow the installer instructions. If the installer does no appear, browse the DVD, go to the Setup folder, and setup.exe.
  • 3.When the installer prompts you to choose a location for the Platinum 88, choose a PERMANENT location. If possible, choose a location on a drive other than the one where your operating system is installed.

 

Running the Platinum 88

 The Platinum 88 runs in Proteus X or Emulator X Version 1.5 or later.

 There are two ways to start the Platinum 88:

  • Go to Start → Program Files → Creative Professional → E-MU Sounde Central → Platinmu 88, and select which version you want to run.

Or

  • Start Emulator X or Proteus X, select File → Open, and browse to the location where you saved your banks.

音楽制作へ戻る。